Compute the fuel mix for a 2-cycle

How Much Oil For A Two Cycle Without Oil Injection?

(navigation buttons at the end of the page) pro1040 ©

The Question:
	How much oil should be added to gasoline fuel for a 50:1 ratio
Objectives
	Compute the number of ounces of oil - be certain your motor AND your oil is approved for a 50:1 ratio.
Related Articles

Have the computer compute the number of ounces -
	Simply enter the size of tank, or fuel added, in gallons such as 4.0 (four gallons) and click the how much button to see the correct amount of oil to add for a correct 50 to 1 ratio. US gallons gas: Ounces of oil to add is:
This is the Mathematics
	Example: GALLONS X 128 (ounces) / RATIO = OUNCES OF OIL TO MIX WITH GAS 6 gallons X 128 (ounces) / 50 (50:1 ratio) = 15.36 ounces of oil for 6 gallons of gas. 128 ounces = 1 gallon 1 ounce = 0.0296 liters 16 ounces = 1 pint 1 gallon = 3.789 liters 2 pints = 1 quart 4 quarts = 1 gallon Always use the certified "NMMA TC-W" two cycle engine oil approved for your outboard motor. Just remember that when in doubt, it's always best to add a little more oil which may foul the plugs a little. Too little oil can damage the internal parts of a two stroke motor as that is your lubrication for crankshaft, bearings, connecting rods, etc.

Kit to Prepare for Your Adviser
	No adviser kit available

Engagement Status Letter ~ WARNING!

WARNINGS ABOUT THIS SITE'S CONTENT Bob Parrish CPA, P.C.

WARNING! Privacy Statement Disclaimer and Warning - From Bob Parrish CPA, P.C.

WARNINGS ABOUT THIS SITE'S CONTENT - Securities Related

WARNING! Privacy Statement Disclaimer and Warning - From Bob Parrish CPA, P.C.

Navigation

Simply to Help —Helping You To Keep More Of What You Earn and Helping You To Protect What You Keep

- Help To Keep Your Life In Balance