Released March 1995
Training 3149-111, TPDS 83835X,
MISSION
The purpose of the Internal Revenue Service is to collect the proper amount of tax revenue
at the least cost; serve the public by continually improving the quality of our products
and services; and perform in a manner warranting the highest degree of public confidence
in our integrity, efficiency and fairness.
MISSION OF EXAMINATION
Examination supports the mission of the Service by maintaining an enforcement presence and
encouraging the correct reporting by taxpayers of income, estate, gift, employment, and
certain excise taxes in order to instill the highest degree of public confidence in the
tax system's integrity, fairness, and efficiency. To accomplish these goals, Examination
will:
Measure the degree of voluntary compliance as reflected on filed returns;
Reduce noncompliance by identifying and cost-effectively allocating resources to those
returns most in need of examination and taxpayer contact;
Conduct, on a timely basis, quality examinations of tax returns and quality contacts to
determine the correct tax liability.
INTRODUCTION
In most jurisdictions, there are minimum education and work experience requirements to be
eligible to take the examination to become a licensed ARCHITECT. When the examination is
passed, every licensed architect receives a certificate of licensure and is permitted to
use a seal or rubber stamp bearing their name, certificate number, and the words
"LICENSED ARCHITECT." A corporation or partnership may engage in the practice of
professional architecture only if the person or persons DIRECTLY IN CHARGE OF PROFESSIONAL
WORK is a duly licensed architect.
Typically most plans or SPECIFICATIONS relating to the construction or
alteration of buildings or structures shall not be accepted or approved without the stamp
of a licensed architect or engineer. Often every page of plans and specifications be
stamped by a licensed architect or engineer for a construction permit request to be
approved.
Many construction supply companies offer standard designs to their
customers. Some building contractors have their own architectural staff to provide designs
and plans for the structures that they build. Since only a small percentage of the cost of
construction is for the plans, it is usually not necessary to specifically audit this part
of their operation. Many other owners will go to an architectural or an engineering firm
to obtain the necessary plans to build or remodel their buildings.
An architectural firm may provide a variety of services to their clients. These services
generally include CONSULTATION, DESIGN, and SUPERVISION OF DESIGN of commercial,
governmental, and residential structures or buildings. The plans, specifications, and
other related documents that are produced in the design phase are called construction
documents. A few firms will act as the general contractor, but the construction documents
are normally shown to others. These general contractors make bids on the project. The
architect reviews the bids and recommends one or more of the general contractors to do the
job. The client selects and contracts with the general contractor of their choice. The
architectural firm will then provide SUPERVISION OF CONSTRUCTION to ensure that plans and
specifications are being followed. As construction progresses, the general contractor will
make changes that are requested by their client or deemed necessary by the architect in
charge of the project. The percentage completion, which is normally the basis for
compensation to the general contractor, is determined by the architectural firm. The
specific services to be provided and the fee to be paid are usually set forth in a
contract (small jobs may not have them) between the project owner (client) and the
architectural firm. The American Institute of Architects (AIA) has standard contracts
which many firms will use.
Architectural firms are the bellwether of the construction industry. The work that they
perform today results in construction done months or years in the future. Therefore, when
there is a downturn in the economy they are among the first firms in the construction
industry to be hurt. On the other hand, they are the first to reap the benefits of an
upswing in the economy. Larger firms tend to be hurt the most during downturns because
resort and other large projects are often put on hold due to lack of financing. Mid- sized
firms, which have diversified the type of work that they do, will usually fair much better
since their projects tend to go forward even when the construction industry as a whole
does poorly.
People from different backgrounds/disciplines often go into business together. Some firms
will provide additional services such as interior design or engineering. The services
provided are only limited by the skills and talent of the people involved. The discussion
in this MSSP Guide will be primarily focused on "regular" architects, but much
of it will apply to the fuller service firms as well.
State statutes typically provide for the licensing and regulation of PROFESSIONAL
ENGINEERS, ARCHITECTS, SURVEYORS, and LANDSCAPE ARCHITECTS and impose penalties for
unlicensed/illegal activity. More information about the licensing and penalty procedures
for your area should be obtained from your local licensing authority.
MSSP - Methodology
The following procedures can be used to identify specific returns reflecting income from
architectural services and to develop sources of third party information that would be
useful in the examination of these returns.
A computer listing of Form 1120 returns posted with PIA Code 8911 --
Architectural and Engineering Services can be obtained from your service center (check
with your PSP to determine local procedures for getting this type of listing). The
architectural firms on this listing can be identified by company name (the word
"architect(s)" appears in the name) and by comparison of this listing with the
yellow page telephone listing. The firms that are advertising architectural services, but
not reflected on the computer listing should be called to determine why no record of
filing was found based on the computer sort. Some of the reasons identified to date are as
follows:
1. Taxpayer used the wrong PIA Code
2. Taxpayer filed a Form 1120
3. Taxpayer was a branch/division of a corporation filing in another district.
A computer audit specialist (CAS) can also use a tape produced by the
service center of the Individual Master File (IMF) and sort for PIA Code 7682. The CAS can
then provide a printout sorted by location, activity code, and name (in alpha order) of
individual filers involved in architectural services.
A systematic selection process should be used to pick sample cases from these two sources
(corporate and individual returns), unless all returns are to be examined.
State and local government agencies should be contacted to ascertain any relevant
information available and to determine the format of this information. Sometimes
governmental recordkeeping is limited, not computerized, or difficult to access. One
example of information currently maintained by a governmental agency, but not practical
for use is as follows: The State of Hawaii has a general excise tax on gross income from
various activities. It allows a deduction for all amounts paid to subcontractors. These
subcontractors have to be licensed by the State in order to qualify as a deduction. The
taxpayers provide a list of these subcontractors on the general excise tax return, along
with the amount paid to each during their tax year. If the system had been computerized,
it would have been an excellent source information to test gross income, for many of the
architectural firms involved in the construction industry. Since it was not, the
information was not readily accessible for use in audit.
If a similar tax return exists in your state or locality, information may
be computerized by that jurisdiction or it may be feasible to create a data base of
payments to subcontractors that are reflected on this type of return. For architects, the
payments listed would be for work that they performed for other architects or for some
other type of firm that was acting as the primary contractor and controlling the job.
Local governments may also require permits for all changes and alterations
which would normally require a plan. The permit information is often kept on computer
tape, updated monthly and is readable by IRS computers. A CAS can use a copy of the permit
file tape to search the plan maker field (plan maker will usually be the architect). A
sort of this file can be done using the names of the licensed architects who are the
officers of corporations and the sole proprietors being examined. All permits issued in
the prior, current, and subsequent year can be printed out. This list can be used to test
gross income by providing a third party check on the projects that the taxpayer worked on.
Their usefulness of the permit file is subject to certain limitations. It
may cover only the local area and in addition, Federal and State Governments are usually
exempted from obtaining building permits. Civil engineering projects for infrastructure
(roads, bridges, drainages, etc.) also may not require a building permit. It is most
useful for the Schedule C and small corporate cases, since much of their income is from
smaller jobs that do require building permits. Often, very few of the jobs of the large
and mid-sized corporations will be listed in the permit file.
A roster of all licensed architects in the state can also be obtained from
the appropriate licensing authority in your jurisdiction. This roster can serve as a cross
check for return filings.
CHAPTER 1 EXAMINATION TECHNIQUES
Income
The Tax Audit Guide for internal Revenue Examiners on architects is found in IRM
4231.6(14)(6). Item (4) does not appear to be applicable since contractors generally
obtain performance bonds from a bonding company rather than depositing funds with the
architect.
General Information
Rule of Thumb
The architect will be paid about 10 percent of the project cost for small
jobs. For larger jobs, the percentage may drop to 4 percent or 5 percent of the project
cost.
Unless the job is small, the taxpayer will generally have progress
billings rather than lump sum payments. They often will be tied to the completion of
various phases of the service provided by the architect. The phases include: Schematic
design, design development, construction documents, bidding or negotiation, and
construction. The plans represent the only real leverage the architect has to secure the
payment of fees. Therefore, they will normally have billed 80 percent to 90 percent of
their fee by the start of the construction phase. Collection for all work done prior to
the supervision of construction should be completed early in the construction phase.
The architect may have problems collecting the last amounts billed to
clients. The client may be running low on funds, disagreements may arise on the pricing
for changes or any number of other problems. Some architects may choose to "walk
away" rather than create ill will or litigation by sending a collection agency after
their clients. Amounts not collected should only be a small percentage of the contract
price. If it is a large amount or percentage, there may be the possibility that the
architect is receiving noncash payments for their services. If in doubt, ask client for
verification.
Accounting Method
Internal Revenue Code (IRC) section 448(b)(2) provides that the limitations set forth in
subsection (a) shall not apply to "Qualified Personal Service Corporations" and
thereby allows Qualified Personal Service Corporations to use the cash method of
accounting with no gross receipts test required. A Qualified Personal Service Corporation
is treated as an individual partner for purposes of determining whether a partnership may
use the cash method of accounting. IRC section 448(d)(2) defines a Qualified Personal
Service Corporation. Most architectural corporations will meet the stated requirements.
Therefore, they will generally use the CASH METHOD OF ACCOUNTING FOR TAX. The larger firms
will often keep their books on the accrual basis, but they will make yearend adjusting
journal entries to bring them back to cash.
Books and Records
In general, the smaller Schedule C's tend to use a manual check register. The larger
Schedule C's and smaller corporations often use a generic finance and checkbook software
program. The larger corporations are computerized using software specifically designed for
the industry. This enables them to track the progress and profitability of individual
projects. Generally, these software systems can use the project and other financial
information to produce various management reports.
All firms should have and maintain job files for every project they work on. These files
contain the original contract with any addendums, copies of billing invoices (usually
customized to the project, so there were no numerical controls, but the date payment is
received is generally marked on them), and correspondence. Receipts/Invoices/Contracts
relating to expenses and reimbursable items are normally filed in chronological order. The
job file is in essence a complete history of the project. It is important to the firm to
properly maintain these job files to support job cost information, to control billing and
accounts receivable and to maintain an accurate record of the project in case of possible
litigation.
Bank Deposit Analysis
Architects need to have good records due to possible litigation, but more
importantly, they need to know the status and profitability of each job that they work on
to make good business decisions. Therefore, the job files and other records are normally
well kept. Missing or incomplete job files are strong indicators of possible unreported
income which would require an expansion of the audit.
As part of the job file(s) you will find the contract between the owner and the architect.
it spells out the services that will be provided by the architect, the fee amount, and
when payment is due. A review of the contract and any addendums of a sample of projects
will alert the agent to the amount and character of the payments to be received from the
project. The billing invoices should tie-in to the contract amount. All payments received
should be traceable to a bank deposit. Any exceptions should be fully investigated. As a
minimum check of gross income, a few projects should be tested to ensure that all funds
are being deposited.
The bank deposit analysis can be useful since the taxpayers are generally on the cash
basis. This is especially true for smaller firms and those with poor recordkeeping. For
larger firms with better internal control and recordkeeping, it will be less useful. For
these firms, you can expect project receipts to tie in almost exactly to the income
amounts shown on the tax return. The question for the examiner is whether or not all
projects are being reported by the taxpayer. To test this, a third party source of project
names and/or locations is required.
As previously mentioned, the local construction permit file can also be used to test
income. Ask the taxpayer to breakdown the reported sales by project and compare this list
with the list obtained from the permit file. Any projects on the permit file list but not
on the sales list should be fully investigated.
Other Possible Third Party Sources
1. Information Returns -- Federal Government executive agencies should be filing Form 8596
-- Information Return for Federal Contracts in excess of $25,000 and longer than 120 days
(with some exceptions) Also, if a noncorporate architect acts as asubcontractor, a Form
1099 should have been filed.
Both of these types of returns will be listed on the information returns processing
transcript (IRPTR) or the information returns processing on-line (IRPOL) for more current
years.
2. Blueprinting Expenses -- Only very large architectural firmscan justify the cost of
owning and operating their own blueprintingmachine. The others rely on outside vendors.
Ask the taxpayer how the expense records are kept. If it is by vendor or expensecategory,
sample each vendor's invoices. Look for an address or other information to determine the
project name or location. If you can identify the jobs from the invoices, compare it with
the sales list and follow up any exceptions. If you can't identify the jobs from the
invoices, ask the taxpayer to do it for you.
3. Insurance -- Professional liability insurance is normally high due to the frequency of
litigation (many firms will have rules specifically stating that their employees are not
allowed to"moonlight" thus shielding the firm from another possible source
oflitigation). The insurance company depends on the insured to expose those jobs being
litigated. The insured's incentive is lower premiums. As one would expect, increasing
claims translates to increasing premiums. The insurer may require a listing of all (or
some) of the projects that the taxpayer is working on to determine the premium level to
charge. This list can also be compared with the sales list.
4. Plans -- Architects will keep a copy of all plans bearing their stamp either in the
office or in storage due to possible litigation and/or as a basis for additional work. If
they are stored in some chronological order, a listing of plans completed just prior to,
during, and just after the year(s) of audit can be made and compared with the sales list.
5. Subcontractors/Consultants -- Contact a few of the subcontractors/ consultants used by
the taxpayer and ask them to provide a listing of the projects that they were paid for by
thetaxpayer during the year of audit. This list can be compared with the sales list.
Alternatively, ask the taxpayer to substantiate the payments made to a sample of
subcontractors/consultants. Reques the cancelled checks, invoices, and the name of the
projects associated with each invoice. This list of projects can be comparedwith the sales
list. if there is a question as to the validity of the project list, the examiner should
be able to trace the expense back to the job file.
Expense
Two of the larger expense items (blueprinting and insurance) have already been mentioned.
The method for auditing these expenses is the same as for non-architectural firms.
General Information
REIMBURSABLE EXPENSES are expenses incurred and paid by the architect, but which the
client agrees to repay. The existence of these expenses are spelled out in the contract.
It will include items like transportation, travel, long distance communication, fees for
securing approvals required for projects, blueprint copies, postage, and so on. The
architect will either expense these items when paid, reporting income or reducing claimed
expenses for any reimbursements, or create an asset (advance) account. Since these
reimbursable expenses are in effect loans to their clients, an asset account should have
been created. However, since most costs are usually reimbursed within a short period of
time, it may not be material enough to warrant adjustment. Even if no adjustment is made,
the method used to account for them will impact on the size of expenses shown on the
return. If the architect takes the reimbursements into income, the expenses shown will be
higher than those that would be shown on a return using one of the other two methods. If
the firm also does interior design work, it should be using a client advance account
because the size of the reimbursable expenses will be greatly increased. More reimbursable
expenses are incurred since the interior designer can get a discount on furnishings that
is not available to the general public.
Subcontractors/Consultants
This will probably be the largest nonpayroll deduction on the return.
Generally they will be engineering firms, interior design firms, landscape architects, or
surveyors. They usually will not paid for their work until the owner pays the architect.
A simple audit technique is to ask the taxpayer to provide a schedule of their
subcontractors/consultants showing the payee name, Federal identification number, dollar
amount paid, telephone number, contact person, and a description of the work performed.
This schedule can be used as the basis for third party checks of this expense or to
pinpoint any "unusual" payees that you may wish to pursue further. See Exhibit
1-1 for additional information to request on the IDR.
Employment Tax
In reviewing the subcontractor expense, be alert to the possibility of employees being
treated as independent contractors. This becomes more common when firms seek to cut costs
in business downturns.
For architectural firms, the draftsman is one specific category of worker
who appears to be particularly vulnerable. To become a draftsman requires no special
license, so students right out of college are hired for this job. The increasing use of
CAD (computer assisted design) due to the intense time pressures caused by day-to- day
changes also negatively impacts on the need for draftsman's skills. in the past they were
almost always treated as employees.
The question of whether an individual is an independent contractor or an employee is one
of fact to be determined upon consideration of the facts and application of the law and
regulations in a particular case. See Professional & Executive Leasing v.
Commissioner, 89 T.C. 225, 232 (1987), aff'd, 862 F.2d 751 (9th Cir. 1988); Simpson v.
Commissioner, 64 T.C. 974, 984 (1975). Guides for determining the existence of that status
are found in three substantially similar sections of the Employment Tax Regulations;
namely, sections 31.3121(d)-1, 31.3306(i)-1, and 31.3401(c)-1, relating to the Federal
insurance Contributions Act (FICA), the Federal Unemployment Tax Act (FUTA), and Federal
income Tax Withholding, respectively.
In general, it should be noted that section 3121(d) of the Internal
Revenue Code requires the application of the common law rules in determining the
employer-employee relationship. In determining whether an individual is an employee under
the common law rules, 20 factors have been identified as indicating whether sufficient
control is present to establish an employee-employer relationship. The 20 factors have
been developed based on an examination of cases and rulings considering whether an
individual is an employee. The degree of importance of each factor varies depending on the
occupation and the factual context in which services are performed. See Rev. Rul. 87-41,
1987-1 C.B. 296. The twenty factors are not to be applied blindly. Rather, they are to be
used as an aid in applying the common law.
Although a variety of factors may be used to analyze employment status for
tax purposes, the regulations provide that employer control over the manner in which the
work is performed is probably the most important. The test is either actual control by the
employer or the right to control.
For further assistance regarding employment tax issues, contact the employment tax
coordinator.
After it is determined that an examination of the employee/independent
contractor issue will be undertaken, IRC section 530 should be addressed as early as
practicable. IRC section 530(a)(1) of the Revenue Act of 1978 terminates an employer's
liability for employment taxes under subtitle C, which includes FICA, FUTA, and income tax
withholding, and any interest or penalties attributable to the liability for employment
taxes. IRC section 530 provides that, for employment tax purposes, an individual will be
deemed not to be an employee unless the employer has no reasonable basis for not treating
the individual as an employee. The purpose of IRC section 530 is to shield employers who
had a reasonable basis for treating workers as independent contractors from employment tax
consequences arising from the employment status reclassification by the Service.
For an employer to be eligible for relief under IRC section 530:
1. All required information returns must have been filed on a timely basis (for example,
Form 1099);
2. The employer must not have treated any other workers holdinga substantially similar
position as employees after 1978;
3. The employer must have had a reasonable basis for not treating the workers as
employees.
The employer may establish a reasonable basis or not treating the workers
as employees by relying on any of the three safe havens under IRC section 530(a)(2):
1. Judicial precedent, published rulings, or a technical advice memorandum or private
letter ruling with respect to the taxpayer; or
2. Prior Service audit of the taxpayer; or
3. Long-standing recognized practice of a significant segment of the industry
("industry practice") in which the work is engaged.
As early as possible during the examination, it is important to discuss
with the taxpayer the reasons the workers were treated as independent contractors. During
the discussion, the examiner should keep notes of the taxpayer's responses. A taxpayer
cannot have relied on recently decided cases for years prior to the taxpayer' s decision.
An opinion letter from an attorney written after the examination began is less persuasive
than one that was written when the employer first began using the workers and treating
them as independent contractors. The taxpayer has the burden to of establishing industry
practice based on objective criteria substantiated by the taxpayer. See Exhibit 1-2 for a
list of sample interview questions.
For example, in General Investment Corporation v. United States, 823 F. 2d
337 (9th Cir. 1987), the court held that a mining company had a reasonable basis treating
miners as independent contractors because the taxpayer had substantiated that the practice
of treating miners as independent contractors was both long standing and well recognized
within a significant segment of the mining industry.
For further assistance regarding IRC section 530 issues, contact the Office of Associate
Chief Counsel (Employee Benefits and Exempt Organizations) at (202) 622-6040.
Legal Fees
Due to the nature of this business, there can be a lot of litigation. This means that in
some years legal fees might be extremely large. If selected for audit, make sure that the
payments are for current services and not for possible future litigation (an asset rather
than an expense). Check also for personal expenses.
INFORMATION DOCUMENT REQUEST
In addition to the usual documents requested from taxpayers on the initial Information
Document Request (Form 4564), the examiner should request the following items from
architects:
1. Sales - $xxxxxxxxxxxxxx - Prepare a schedule showing thebreakdown, by project, of
reported sales. Have all project/job files, billing invoices, cash and sales journals/logs
and any other documents used to record sales available for inspection.
2. Subcontractors/Consultants - $xxxxxxxxxxx - Prepare a schedule with the following
information on each consultant paid:
a. Name
b. Telephone number and contact person
c. State contractor's or other license number
d. The $ amount paid during the year
e. Form of business (corporation, sole proprietorship, etc.)
f. Federal identification number (for sole proprietors list the social security number)
g. Description of the work/service provided.
3. Copies of all information returns filed (including, but not limited to Forms 1099 and
W-2).
SAMPLE INTERVIEW QUESTIONS
Listed below are questions that the examiner should consider asking the architect during
the initial interview. These will be in addition to the ones that are normally asked in
audit. This list is not intended to be all inclusive, but should help the examiner plan
the audit.
1. Which personnel in your office are licensed architects?
2. Who stamps the work in the office?
3. For information and liability purposes, how do you keep track of all the jobs/plans
which bear your stamp or that of your employees?
4. How and where do you file/store your job files?
5. How and where do [you] file/store your plans?
6. Do you have a formal policy on moonlighting by your employees?
7. What type of jobs/projects do you do (residential, commercial, government) and where
are they located (local, state, National, international)?
8. Can you describe the chronology of events/processes in your operation for each type of
job?
9. Do you use a standard contract in your business? If yes,obtain copy. If no, explain
what is used in the business.
10. Do you have contracts for all jobs? If no, how do you keep track of these jobs.
11. Do the licensed architects ever review and stamp any plans not prepared by themselves
or an employee for a fee? If yes, where is the compensati recorded.
12. Does your professional liability insurance company require a listing of all or some of
your jobs on a regular basis? If yes, obtain copy.
13. What types of expenses are reimbursed by the client? How isthe reimbursement accounted
for?
CHAPTER 2 COMMON AND UNIQUE INDUSTRY ISSUES
Sole Proprietors
Verification of gross income will always be an important audit issue. See the Examination
Techniques chapter for further discussion.
The largest expense on the return will probably be for subcontractors or consultants.
Unless the architect is acting in the capacity of a general contractor, this expense
primarily consists of amounts paid for the services of engineers and other architects.
There may be employment tax and information return issues related to this expense. See the
employment tax portion of the Examination Techniques chapter for further discussion.
Blueprinting expenses are for the reproduction of architectural plans.
These copies are required to obtain permits and for use in construction. The architect
will pay for the copying and be reimbursed through client billings.
The Keogh/SEP deduction causes some taxpayers problems. Either they fail to timely pay in
the amount claimed or they incorrectly computed the maximum allowable contribution.
Corporations
The comments made above, on sole proprietors, are generally applicable to corporations as
well. The issues that are described below are specific to the audit of corporations.
Tax Rate
Virtually all architectural firms will meet the definitional requirements of a personal
service corporation, as stated in IRC section 448(d)(2). Qualified personal service
corporations are taxed at a flat rate of 34 percent of taxable income rather than using
the corporate graduated rates. This is per IRC section 11(b)(2). For tax years beginning
on or after January 1, 1993, the flat rate is 35 percent.
Tax Year
Personal service corporations, partnerships, and S-Corporations generally are required to
be on the calendar year. Exceptions are made if the taxpayer can establish a business
purpose for a different accounting period to the satisfaction of the Secretary. See IRC
sections 441(i), 706(b), and 1378(a), respectively, for the specific allowable years.
Under IRC section 444, the taxpayer may elect to have a tax year other
than the required tax year. This election is made on Form 8716. The effect of this
election for partnerships and S-Corporations is that they become subject to IRC section
7519 and must file Form 8752. Personal service corporations become subject to the
deduction limitations of IRC section 280H.
Of particular interest is that IRC section 280H(e) states, "* * * no
net operating loss carryback shall be allowed to (or from) any taxable year of a personal
service corporation to which an election under IRC section 444 applies."
Shareholder Schedule C
It is possible, but not usual for a taxpayer to own and work for an architectural
corporation and to run a totally separate architectural Schedule C business. The facts and
circumstances surrounding the two businesses must be fully developed to determine if a
possible dividend issue exists. If the Schedule C shows a loss or minimal gain, check for
personal expenses and expenses paid for by the related corporation being deducted.
Passive Activity Losses
If the taxpayer has a trade or business activity in which it does not materially
participate or has rental property which is generating a loss, check to be sure IRC
section 469 has been properly applied by the taxpayer. Please refer [to] the MSSP Guide
for Passive Activity Losses for more information.
Personal Holding Company Tax
A personal holding company (IRC section 542; Treasury Regulation section 1.542-1 -
1.542-3) is any corporation (other than those mentioned in IRC section 542(c)) if (1) at
least 60 percent of adjusted ordinary gross income for the tax year is personal holding
company income and (2) at any time during the last half of the year more than 50 percent
in value of its outstanding stock is owned, directly, indirectly, by or for not more than
five individuals.
The term "personal holding company income" (IRC section 543) means the portion
of the adjusted ordinary gross income which consists, among other items, of amounts
received pursuant to a contract under which the corporation is to furnish personal
services if some person other than the corporation has a right to designate (by name or
description) the individual who is to perform the services, or if the individual who is to
perform the services is designated in the contract, as well as from sale or disposition of
the contract. Additionally, at some time during the year, 25 percent or more in value of
the outstanding stock of the corporation must be owned directly or indirectly by, or for,
the individual who has performed, is to perform, or may be designated (by name or
description) as the one to perform such services.
The architectural corporations generally avoid becoming personal holding
companies by using the corporate name on its contracts rather than naming specific
individuals. They also do not give the client the right to designate who is to perform the
services outlined in the contract. A review of a few contracts will verify that this is
being done. If it is not, a possible issue exists. The personal holding company tax is
imposed by IRC section 541.
CHAPTER 3 COMPLIANCE 2000
If you determine that there is a compliance problem in your area, make use of the local
professional organizations for architects (for example, American Institute of Architects
(AIA)). Taxpayer education can be done through articles in their newsletters and/or talks
at their meetings.
Direct mailings can be also be used. The architects in your area normally
will be listed in the yellow pages of your local telephone directory. Mailing addresses
can then be obtained directly from the taxpayers or through the use of other types of
directories.
Since most of the architectural service businesses in your area will be
listed in the yellow pages of the local telephone book, it can also be used to check for
nonfilers. Either they can be checked individually or a CAS can be utilized to obtain
listings of filed returns by PIA code for comparison.
GLOSSARY
1. ARCHITECT -- A person who holds oneself out as able to perform, or who does perform,
any professional service such as consultation, investigation, evaluation, planning,
design, including aesthetic and structural design, or observation of construction, in
connection withany private or public buildings, structures, or projects or the equipment
or utilities thereof, or the accessories thereto, wherein the safeguarding of life,
health, or property is concerned or involved, when the professional service requires the
application of the art and science of construction based on the principles of mathematics,
aesthetics, and the physical sciences.
2. CONSULTATION -- Meetings, discussions, written or verbalmessages,
reports, etc., involving scientific, aesthetic or technicalinformation, facts, or advice
for the purpose of planning, designing, deciding, or locating construction or alterations
of structures, buildings, works, machines, processes, land areas, or projects.
3. DESIGN -- Any sketch, plan, drawing, outline, statement, scheme,mode
contrivance, or procedure which conveys the plan, location,arrangement, intent, purpose,
appearance, and nature of constructionor alteration of existin or proposed buildings,
structures, works, machines, processes, and area, or projects.
4. DIRECTLY IN CHARGE OF PROFESSIONAL WORK -- Personal preparation or
direct supervision of the preparation and personal review of all instruments of
professional service.
5. LANDSCAPE ARCHITECT -- A person who holds oneself out as able toperf
professional services such as consultation, investigation, reconnaissance, resea design,
preparation of drawings andspecifications, and observation of construction where the
dominantpurpose of the services is:
a. The preservation and enhancement of land uses and natural land features;
b. The location and construction of aesthetically pleasing and functional approaches for
structures, roadways, and walkways; and
c. The design for equestrian trails, plantings, landscape irrigation, landscape lighting,
and landscape grading.
This practice shall include the location, arrangement, and design of tangible objects and
features.
6. PROFESSIONAL ENGINEER -- A person who holds oneself out as able to
perform, or who does perform, any professional service such as consultation,
investigation, evaluation, planning, design, orobservation of construction or operation,
in connection with any public or private utilities, structures, buildings, machines,
equipment, processes, works, or projects, wherein the safeguarding of life, health, or
property is concerned or involved, when such professions service requires the application
of engineering principles and data. There are many specialties in this field including the
following: (a) agricultur (b) chemical; (c) civil; (d) electrical;(e) hydrolic; (f)
industrial; (g) mechanical; (h) structural; and (i)sanitary.
7. SPECIFICATIONS -- The specifying of material, equipment,projects, or
methods to be used in the construction or alteration of buildings, structures works,
machines, processes, land areas, or projects.
8. SUPERVISION OF CONSTRUCTION -- Making visits to the site by a registe
engineer, architect, or landscape architect, as the case may require, to observe the
progress and quality of the executive work and to determine, in general, if the work is
proceeding substantially in accordance with the contract documents.
9. SUPERVISION OF DESIGN -- A registered engineer, architect, or landsca
architect, as the case may be, shall exercise direct control and oversee the sub activity
and be responsible for all work performed on plans, specifications, and other related
documents.
10. SURVEYOR OR LAND SURVEYOR -- A person who holds oneself out as able make, or who does
make casastral surveys of areas for theircorrect determinatio and description, either for
conveyancing or forthe establishment or re-establis of land boundaries or the plotting of
lands and subdivisions thereof.